Beginner's Guide to Installing a New Shower Unit

Go Services

On this page down the page you can locate some great help and advice relating to How to Install a Direct-to-Stud Shower Enclosure.

A successful shower installation requires mindful planning and also a lot of job. In many cases, you will certainly need to do 3 types of tasks: framing wall surfaces, installing the plumbing, as well as ending up walls.

Different Kinds Of Shower Units

Push-on Mixer: The tube and spray parts of the push-on mixer shower system can be attached to the bathroom faucet as per your requirement, as well as the water temperature level can be readjusted using the faucets. Push-on mixers are cheap as well as exceptionally simple to install. Nevertheless, although the pipe link is straightforward, it is easily removed. In addition, it is bothersome to adjust the temperature level.

Bath/Shower Mixer: The tube and also spray of this type of shower are combined with a bathroom mixer faucet, as well as the temperature can be readjusted via the bath taps. It is a really inexpensive alternative as well as no extra plumbing is entailed. Nevertheless, the bath/shower mixers also suffer from bothersome temperature control choices.

Manual Mixer: The tube as well as spray of a manual mixer shower system belong of the wall unit as well as the cold and hot water supplies are linked to a solitary valve The temperature and also stress of the water are controlled with either one or a selection of handles (in more costly showers). Although temperature level control is a lot easier in hand-operated mixer kinds, they are more expensive than the formerly stated mixers. They additionally call for additional plumbing of cold and hot water supply pipelines.

Thermostatic Mixer: The tube and also spray of this shower kind belong of the wall surface device and also the hot and cold water supplies are connected to a solitary valve right here too. It is complete with a built-in stabiliser to self-adjust the water temperature as well as to avoid it from ending up being too warm. Among the greatest advantages of a thermostatic mixer shower kind includes convenient temperature level control. Nevertheless, it is one of the most pricey of the different mixer options.

Power Shower: A power shower is a single unit having an effective electrical pump that is capable of modifying both the water pressure as well as temperature level. This type of shower can be fitted if there is water from a cold water tank and also a hot water cylinder. A power shower makes the modification of both stress and temperature simple. On the other hand, it disagrees for water warmed straight by the shower or where the water is supplied by a combination boiler under mains pressure.

Electric Shower: An electric shower is plumbed right into a keys cold water supply and it heats the water electrically. It is essential to note that for this shower kind to be set up, the mains pressure requires to be at the very least 0.7 kg/sq cm (10lb/sq in). The device permits the temperature level as well as pressure to be changed through a knob. Versions with temperature level stabilisers are better as they continue to be untouched by other faucets somewhere else in use within the household. A significant disadvantage of electrical showers is that the control knob just permits the option of heats at less stress, or lower temperatures at a better pressure. This is bothersome in the winter season when the spray is often weak as well as the keys water is colder. Nevertheless, this trouble is tackled in some designs which are readily available with a winter/summer setting.

A Lot Of Usual Mistakes

Breaking or ignoring regional code limitations.

Making use of pipelines that are also tiny.

Attaching copper to galvanized without making use of a brass or dielectric suitable between the two.

Not making use of tape or pipeline compound at threaded joints.

Not leveling your components when installing them.

Not installing an air void filling up for components.

Cutting supply stub outs too brief to install the shutoff valves onto after the ended up wall surface remains in place.

Not effectively lining up tubes into installations or stop valves. (Compeling the nut onto the compression ring at an angle when the tubing is at an angle will trigger a leakage.).

When turning the water back on in your house, constantly run the outside hose pipe shutoff or purge your toilets to bleed dirt and air from the lines. This debris can trigger troubles in your sink taps and other plumbing trim.

Prep work.

Firstly, you should pick the type of shower that you wish to set up. It is important to establish whether the picked shower can managing specific systems and also can manage a secure degree of water with the central heating boiler. A lot of shower systems nowadays are created to be versatile to different water pressures (such as saved hot water and chilly mains).
It is likewise vital to take into account the water stress and the preparation of the piping as well as drain for the shower.

Approach.

Relying on the sort of shower you want to install, the shower head have to either be fitted in order to avoid its contact with the water in the bath listed below or the base tray, or it must have a check shutoff.
Prior to beginning, it is a good idea to mark the positions of the shower head and also control, and to intend the pipe-work involved. Furthermore, the water drainage system to remove the drainage will require to be intended. Both positions of the cable television course and also the shower switch will likewise require to be taken into consideration if an instantaneous or electric shower system is being mounted.
Make use of the guideline overview provided with the shower system to fit the shower control.Before fitting the pipes that will supply the water to the shower system, it is essential to cut off the water system. In order to shield the pipelines, they must be provided a water resistant covering and also fitted with separating valves. The pipes can after that be hidden into the wall surface as well as plastered over to neaten the total look.
Fit the base tray, shower head, as well as fittings.
Attach the primary shower control to the pipes that will certainly be supplying the water (This might need a female screw string adapter).
Reconnect the water and examination the pipes for any kind of leaks, as some might need firm.
If you are installing an electrical shower, bear in mind to switch off the power supply before making any type of electric connections. When these links have actually been made (there should be support within the user's manual), the power supply can be changed back on.

Readjusting Water Pressure to Match Your Shower.

The cold water tank can be lifted to a better height (occasionally as little as 150mm (6inches)) by fitting a strong wooden support underneath it - perhaps made up of struts and also blockboards. If you pick this alternative, the major and also circulation pipelines will also have to be raised to satisfy the new height of the reservoir.
Alternatively, a booster pump (a solitary pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it must be connected right into the power supply in order to run.

Piping as well as Drainage.

It is best to use 15mm size supply pipelines, and make the runs to the shower as short and straight as possible so as to preserve maximum pressure and also reduce heat loss. Additionally, by reducing the use of elbows for pipe edges, you can reduce the resistance in the circulation of the supply of water. You can attain this by bending the pipelines instead.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Do you like reading up on How to Build a Shower Enclosure for Your DIY Bathroom? Put a review directly below. We'd be glad to hear your reactions about this post. Hoping to see you back again before long. Enjoyed our piece of writing? Please share it. Let others find it. I appreciate reading our article about How to Build a Shower Enclosure for Your DIY Bathroom.

View More